3-STEP INSTALLATION OVERVIEW
You can install your new escape ladder in 3 easy steps: 1) Prepare the Area, 2) Install the Pan, 3) Install the Ladder.
For your safety, it is very important that all of the installation directions and safety precautions are understood and followed before using your ladder.
Step 1. Prepare the Area
Identify an ideal location for your escape ladder beneath an upper story window. Measure and mark the correct dimensions for your ladder on the wall space beneath the window. Using the template provided, make cut marks directly on the wall and remove that section of drywall.
Step 2: Install the Pan
Insert the insulation sheet and pan into the open wall space. Through the pan, mark and drill pilot holes into the studs. Bolt the pan to the studs to secure the unit in place.
Step 3: Install the Ladder
With the ladder stack in the proper orientation bolt the webbing to the studs through each side of the pan. Place the ladder stack into the pan with the climbing assistance strap folded neatly on top. Finish the installation by caulking around the outer edge and paint or wallpaper the unit to match the room’s decorating style.
|2-Story Fire Escape Ladder|
|Unit Dimensions||15-1/4" (w) x 8-1/2" (h)|
|3-Story Fire Escape Ladder|
|Unit Dimensions||15-1/4" (w) x 11" (h)|