English [Change]
United States [Change]
Products > Climbing-Equipment > Pump Jacks > PJ Series > PJ-100 Aluminum Pump Jack

PJ-100_PI PJ-100 PJ100_AI_Assembly-2 PJ-100 PJ100_AI_Assembly-5 PJ-100 PJ100_AI_TieDown PJ-100 PJ-ERN_PJ-100_PJ-18P_PJ-WB_2324_Pumping PJ-100 PJ-ERN_PJ-100_PJ-18P_PJ-WB_2324_SidingOverall PJ-100 PJ-SN_PJ-18P_PJ-100_PJ-WB_PumpJack3-PoleVertLeft PJ-100

Resources

Accessories

Complimentary Products

You May Also Consider

PJ-100 Aluminum Pump Jack


Performance Overview


The PJ series aluminum pump jack components are versatile, dependable, and easy to operate. Featuring field-replaceable components, they are compatible and interchangeable with the leading competitor. Pump jacks, aluminum poles, support braces, work benches, end rail kits, and safety nets are included in this series and work with Wernerfts Nestable Stages.




Features

  • Aluminum frame inZin channel is 20% stronger than leading competitor
  • Large boot strap and slip resistant lever
  • Interchangeable with leading competition


Specifications

FeatureSize / Details
ComponentPump Jack
CertificationsANSI A10.8 (2001); OSHA
Approx. Cu. Ft. Per Unit3.47
Approx. Shipping Wt. Lbs.35


Dimensions

FeatureSize


Additional PJ Series Models

Model No.ComponentApprox. Cu. Ft. Per UnitApprox. Shipping Wt. Lbs.
PJ-100Pump Jack3.4735
PJ-12PPole0.8528
PJ-18PPole1.2742
PJ-24PPole1.6956
PJ-6PPole0.4315
PJ-ERNEnd Rail Kit1.1620
PJ-ERWEnd Rail Kit1.1620
PJ-PCPole Connector0.4614
PJ-PF-4Pole Foot0.153
PJ-SBFFoldable Support Brace0.7110
PJ-SBRRigid Support Brace2.7214
PJ-SNSafety Net0.8910
PJ-WBWork Bench2.0620


(15 Questions : 14 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
PJ-100 Aluminum Pump Jack
 
1 answer

if I go 48ft high with aluminum pump jacks do I have to have a center brace

Customer avatar
by
nk
minnesota
2 weeks, 2 days ago
Customer avatar
by
nk
minnesota
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
With the pump jack system, anytime you go above 24ft you need to make sure you have a support brace every 16ft.
2 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 week ago
Customer avatar
by
JTC
Freemansburg, PA, USA
Age: 35-44
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
PJ-100 Aluminum Pump Jack
 
1 answer

How wide of stage will the pump jack hold?

Customer avatar
by
Colorado Contractor
Evergreen, CO 80439, USA
4 months, 1 week ago
Customer avatar
by
Colorado Contractor
Evergreen, CO 80439, USA
Age: 45-54
Gender: Male
I want to purchase a new pump jack system with 24" wide stages. Will a pump jack hold such a wide stage?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Yes the PJ-100 will hold a 24" stage.
4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-SN Aluminum Pump Jack Safety Net
 
1 answer

Do you have an OSHA information on the safety nets meeting fall protection

Customer avatar
by
CHRISTINE
Appleton, WI, USA
5 months, 3 weeks ago
Customer avatar
by
CHRISTINE
Appleton, WI, USA
Age: 45-54
Gender: Female
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We would direct you to the OSHA website at www.osha.gov to review OSHA 1926.502 which relates to fall arrest systems such as nets and the standards which they must meet.

Thank you for your inquiry.
5 months, 3 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-24P Aluminum Pump Jack 24 ft Pole
 
1 answer

Where are the components of your Aluminum Pump Jack system made?

Customer avatar
by
Branko
San Francisco, CA, USA
7 months ago
Customer avatar
by
Branko
San Francisco, CA, USA
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Components of the aluminum pump jack systems are made in different manufacturing facilities around the world. The components are made in Kentucky, China, and Mexico. Manufacturing components in different locations has helped satisfy global demand for all products.
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
9 months ago
Customer avatar
by
Wonder
Herndon, VA, USA
Age: 45-54
Gender: Male
Also, Is it better to get the rigid brace than the flexible brace to attach to the wall?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
When installing a pump jack pole that is 24 feet long or greater, it is recommended that a rope be used to hoist the pole into position. The rope should be pulled through cross members of the support brace and used to pull the top of the pole up to the brace. A pulley may be attached to the support brace to aid in hoisting.

The rigid and foldable support braces provide the same support to the pole. When not in use, the foldable support braces may be folded for easier transportation and storage.
9 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-100 Aluminum Pump Jack
 
1 answer

Are the aluminum pump jacks compatible with 2"x4" lumber to carriy them ?

Customer avatar
by
MDL
Maui, Hawaii, USA
1 year, 4 months ago
Customer avatar
by
MDL
Maui, Hawaii, USA
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The Aluminum Pump Jacks should only be used with the aluminum poles. The aluminum poles have a rubber strip on the back side of each pole that the pump jack will used to climb the pole.
1 year, 4 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
PJ-100 Aluminum Pump Jack
 
1 answer

How tall can I go?

Customer avatar
by
Anonymous
Tacoma, WA, USA
1 year, 6 months ago
Customer avatar
by
Anonymous
Tacoma, WA, USA
Age: 25-34
Gender: Male
How tall can I go on this pump jack system?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The Werner Pump Jack system has a maximum height range up to 48 feet.
1 year, 6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
PJ-SBF Aluminum Pump Jack Foldable Support Brace
 
1 answer

What are the diminsions of the bracket the pole sets in? 3" x 3"?

Customer avatar
by
Ozzie
Tabernash, CO, USA
1 year, 5 months ago
Customer avatar
by
Ozzie
Tabernash, CO, USA
Age: 45-54
Gender: Male
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The PJ-SBF Support Brace is designed to hold the 3" X 3" aluminum pump jack pole.
1 year, 5 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
PJ-100 Aluminum Pump Jack
 
1 answer

What is the weigth limit on set of 24' long aluminum pump jack system

Customer avatar
by
Anonymous
1 year, 8 months ago
Customer avatar
by
Anonymous
I want to know how much weight it can hold, I will have 2 men plus fiber cement siding
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers

Answer: 
As stated on the product ID label for the Pump Jacks, the maximum weight capacity combined of users and materials is 500 pounds. Maximum load must not exceed rated load of either plank or pump jack.
1 year, 8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about Werner Customer Care is loaded.
Additional information about Werner Customer Care could not be loaded.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
2next>>
2next>>



Different types of ladders are designed to keep you safe and productive when climbing or standing. Using the wrong style of ladder or simply ignoring the limitations of climbing equipment can result in a fall or serious injury.
Height is referring to the actual ladder height. Extension ladders should be 7 to 10 feet longer than the highest support or contact point, which may be the wall or roof line. The highest standing level is four rungs down from the top. The highest permitted standing level on a stepladder is two steps down from the top.

Reach height is the maximum reach assuming a 5’6” person with a vertical 12” reach.
Ladders are designed to safely hold up to a specific amount of weight. The Werner Performance System defines five different capacities using a color and star rating system. The Duty Rating is defined as the maximum safe load capacity of the ladder. A person’s fully clothed weight plus the weight of any tools and materials that are carried onto the ladder must be less than the load capacity.

Werner offers ladder made from fiberglass and aluminum. Each material has characteristics which make it best for certain applications, or one material may simply fit the personal preferences of the user. For example, if working around electricity users should select fiberglass products due to their non-conductive side rails.

Performance Overview

5 stars
4 stars
3 stars
2 stars
1 stars
LEARN MORE

Dimensions Overview

To ensure you choose the product best suited to your needs, you should follow the Werner Safety Tips.
LEARN MORE

Specifications Overview

To ensure you choose the product best suited to your needs, you should follow the Werner Safety Tips.
LEARN MORE